Hole and thread callouts
A hole callout writes everything about a hole on one leader: how many holes the same feature made in the view, the drill, its depth or that it goes through, the counterbore or countersink, and the thread of a tapped hole with its length. Moket reads it from the part, from the Hole feature and the thread on its wall, never from the circle's size alone, so the callout changes when the hole does.
Access: Hole Callout on the drawing toolbar. Shortcut: H.
Call out a hole
- Click Hole Callout, or press
H. - Click a circle of the hole in a view where it is seen end on.
- Click where the text goes. The leader ends with an arrow on the circle.
Drag a selected callout to move its text.
What it writes
| Hole | ISO | ASME |
|---|---|---|
| Six 9 mm holes through, counterbored | 6x Ø9 and ⌴ Ø15 ↧ 4 | 6X Ø.354 THRU and ⌴ Ø.591 ↧ .157 (inches) |
| A blind tapped hole | M5 x 0.8 - 6H ↧ 6 and Ø4.2 ↧ 8 | the same in inches, THRU when it goes through |
| A countersink | ⌵ Ø12 x 90° | ⌵ Ø.472 X 90° |
| A circle no Hole feature made | Its diameter, or its thread on a threaded shaft | the same |
The first line counts the holes of the same Hole feature and its patterns in the view. Depths are measured from the mouth of the hole.
Callout properties
| Option | What it does |
|---|---|
| From the part | The lines Moket writes from the hole. |
| Text | Your own text: <callout> stands for the lines from the part, e.g. <callout> BOTH SIDES. Empty goes back to them. |